HUB AND DRUM ASSEMBLY REPLACEMENT.

TM 5-4210-224-14&P

4-247. REAR AXLE SHAFT REPLACEMENT (Continued).

INSTALLATION

c. Torque bolts to 115 ft.-lbs.

a. Place a new gasket over the axle shaft (4) and

position the axle shaft in the housing so that the

d. Install rear drum brake assembly (paragraph 4-

shaft splines enter the differential side gear.

219).

b. Position gasket so that holes are aligned and

e. Install wheel assembly (paragraph 4-203).

install flange (2) to hub (3) with attaching bolts

(1).

f. Lower vehicle.

4-248. HUB AND DRUM ASSEMBLY REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

Equipment Condition

General Mechanics Tool Kit

Para.

Condition Description

Wheel Bearing Nut Wrench (J-2222-C)

Wheel Assembly Removed

Rear Axle Shaft Removed

Materials/Parts

General Safety Instructions

Lubricant (Appendix D, Item 25)

Engine OFF

Hub and Drum (6260831)

Transmission in (N) neutral.

Parking brake and micro-brakelock set.

REMOVAL

a. Disengage tang of retainer (1) from slot or flat of lock

nut (2) and remove lock nut (2) and lockwasher (3) from

housing tube using wheel bearing out wrench.

b. Disengage tang of retainer (1) from slot or flat of

adjusting nut (4) and remove retainer (1) from housing

tube.

4-349