|
|
Figure 67. Drain valve and tubing, removal and installation.
(2)
Refer to figure 67, and remove the
131. Heat Exchanger and Tubing
drain valve and tubing from the valves, lines, and
a.
bracket.
the cooler manifold and tubing from the engine
b.
Cleaning, Inspection, and Repair
compartment.
(1)
Clean all parts with a clean cloth
b.
Cleaning, Inspection, and Repair.
dampened in an approved cleaning solvent, and dry
(1)
Clean all parts with a clean cloth
thoroughly.
dampened in an approved cleaning solvent, and dry
(2)
Inspect all parts for damaged or
thoroughly.
defective condition.
(2)
Inspect all parts for damaged or
(3)
Replace or
repair
damaged
or
defective condition.
defective parts as necessary.
(3)
Replace or
repair
damaged
or
c.
defective parts as necessary.
the drain valves and tubing on the valves, lines, and
c.
bracket.
the heat exchanger and tubing on the engine
compartment.
TAGO 6839A
93
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |