|
|
Figure 68. Heat exchanger and tubing, removal and installation.
132. Relief Valve Control
(3)
Replace or
repair
damaged
or
defective parts as necessary.
a.
the relief valve control from the left side control panel.
c.
Installation. Refer to figure 55, and install
the relief valve control on the left side control panel.
b.
Cleaning, Inspection, and Repair.
133. Water Pump Packing
(1)
Clean all parts with an approved
cleaning solvent, and dry thoroughly.
Refer to figure 69, and adjust the water pump
packing.
(2)
Inspect all parts for damaged or
defective condition.
TAGO 6839A
94
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |