4-174. DOOR WINDOW REPLACEMENT.
This task covers:
Window Handle Clip Removing Tool
Curbside Window (14022841)
General Safety Instructions
Streetside Window (14022842)
CAUTION: Always wear heavy gloves
when handling glass to minimize the risk of injury.
Door Vent, Window Run Chan-
Door Trim Panel Removed
a. Lower the window to the bottom of the door.
Mask or cover any sharp edges that could
scratch glass (1).
c. Slide the glass forward until the front roller (2) is
in line with the notch (3) in the sash channel (4).
d. Disengage the roller (2) from the channel.
Push the window forward and tilt the front
portion of the window up until the rear roller (5)
Put window assembly (1) in normal (level)
position and raise it straight up andout of the
a. Lower the window into the door frame (6).
b. Push the window forward then tilt it up and slide
the rear roller (5) into the sash channel (4).