4-176. TRIM PANEL REPLACEMENT.
This task covers:
Window Handle Clip Remover
General Safety Instructions
Door Trim Pad Clip Remover
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
General Mechanics Tool Kit
Curbside Panel (15597667)
Streetside Panel (15597668)
a. Remove the window regulator handle (1) using
Check that all the trim retainers are
the clip remover (J-9886 -01).
securely fastened and are not damaged.
Replace any damaged fasteners.
b. Remove the door lock knob (2).
c. Remove four screws (3) securing lower edge of
trim panel (4).
d. Remove two arm rest attaching screws (5).
e. Remove arm rest (6) from the door (7).
Remove the screw (8) at door handle cover
g. Remove screw (9) located under arm rest pad
h. Remove door trim panel to door retainers (11)
using the clip remover tool, carefully prying the
top of the panel away from the door side
window seal clips.