DRAFT
TM 5-4210-249-13&P-4
0591
3.
Install preformed packing (34) and elbow (20) on manifold assembly (32).
4.
Install two preformed packings (33) and manifold assembly (32) on hydraulic motor (27) with eight
screws (31).
5.
Install key (29) on shaft (30).
6.
Install two fittings (24) and (18) on hydraulic motor (27).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02904
CAUTION
Shaft, shaft hole, and inside flange on pump and generator must be lubricated prior
to assembly. Failure to comply may cause damage to equipment.
7.
Apply anti-seize on inside flange of hydraulic motor (27) and motor mount (28).
8.
Apply grease into and around shaft hole on motor mount (28) and shaft (30).
0591-5