DRAFT
TM 5-4210-249-13&P-4
0582
CAUTION
Do not damage screen when positioning screen in cap and strainer. Failure to
comply may result in damage to screen.
5.
Install screen (27), gasket (26), and cap (25) on strainer (21).
6.
Install nipple (24) and bulkhead fitting (15) on strainer (21).
7.
Install fitting (12) on strainer (21).
8.
Install nipple (23) and bulkhead fitting (15) on windshield deluge shutoff valve (20).
CAUTION
Fitting must be positioned on windshield deluge shutoff valve with port for
attaching elbow in the down position. Failure to place fitting in down position will
not allow assembly to drain properly and may cause damage to equipment.
9.
Install fitting (22) on windshield deluge shutoff valve (20).
10. Attach hose (19) on fitting (22).
11. Install elbow (10) on fitting (22).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00854
12. Install hose (19) on windshield deluge motor (18) and secure retainer clip (17).
13. Install bulkhead fitting (15) on bracket (16) and tighten lockwasher (14) and nut (13).
14. Install hose (11) on fitting (12).
15. Install drain line (9) on elbow (10).
0582-5