DRAFT
TM 5-4210-249-13&P-4
0581
NOZZLE BODY ASSEMBLY
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01846
1.
Install turbine (14) on nozzle body (4) with retaining ring (13) and three screws (12).
2.
Install four set screws (11) on throat (3).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Silicone sealant must be applied to mating surface of front plunger and extension blade.
3.
Apply sealant on front plunger (10).
NOTE
Thread lock sealing compound is applied to threads of extension blade securing extension
blade to throat.
4.
Apply thread lock adhesive on threads of extension blade (2).
5.
Install front plunger (10) on throat (3) with extension blade (2).
6.
Coat preformed packing (9) with silicone lubricant, and install preformed packing (9) on front plunger (10).
0581-4
