DRAFT
TM 5-4210-249-13&P-4
0578
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
3.
Apply sealing compound to threads of four elbows (3), (4), (10), and (11).
4.
Install two elbows (10) and (11) on air ball valve (16).
5.
Install pump cooler (dump-to-ground) valve (5) on bracket (15) with four washers (14), lockwashers (13), and
screws (12).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00150
6.
Install two water lines (9) and (8) and fittings (7) and (6) on elbows (11) and (10).
7.
Install two elbows (4) and (3) and air lines (2) and (1) on pump cooler (dump-to-ground) valve (5).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0578-3/(4 blank)