DRAFT
TM 5-4210-249-13&P-4
FIELD LEVEL MAINTENANCE
GROUND SWEEPS VALVE REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0483
(WP 0622, Item 27)
WP 0615, Fig. 169
Materials/Parts
Equipment Conditions
Compound, Sealing, Pipe Thread (WP 0625,
Air system drained (TM 9-2320-347-10)
Item 21)
Water system drained (WP 0041)
Tags, Identification (WP 0625, Item 51)
Water pump engine air cleaner assembly
removed (WP 0220)
Pump house panel Q removed (WP 0540)
REMOVAL
TFFT00082
CAUTION
Air lines may be removed directly from elbows and fittings, or may remain attached
to elbows and fittings and removed as an assembly. If air lines are removed from
elbows and fittings, care must be taken not to damage air line. If sealing surface of
air line is damaged air line must be repaired or replaced.
NOTE
Tag and mark air lines prior to removal to ensure proper installation.
Valve shown has air lines remaining attached to elbows.
1.
Remove two air lines (1) and (2) and elbows (3) and (4) from ground sweeps valve (5).
0576-1
