DRAFT
TM 5-4210-249-13&P-4
0571
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01393
16. Install tee (23) on reducer (18) with preformed packing (22) and screw (21).
17. Install air cylinder (3) on cylinder eye (20).
18. Install two preformed packings (19) and cylinder pivots (17) on air cylinder (3).
19. Install two cylinder pivots (17) on reducer (18) with four screws (16).
20. Install turret (13) on mounting plate (15) with four screws (14).
21. Install turret motor (12) on turret (13) with three screws (11).
NOTE
Position elbows and fittings as noted prior to removal to ensure proper installation.
22. Install preformed packing (9), connector (8), two control valves (7), fitting (6), elbow (5), and two hoses (4) on
pattern sleeve (10).
23. Install two elbows (2) and hoses (1) on air cylinder (3).
END OF TASK
FOLLOW-ON MAINTENANCE
Install bumper turret (WP 0569)
END OF TASK
END OF WORK PACKAGE
0571-7/(8 blank)