DRAFT
TM 5-4210-249-13&P-3
0551
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT2533
3.
Remove two nuts (7), lockwashers (8), washers (9), screws (10), and hinge (6) from pump house access
door (1). Discard lockwashers.
4.
Remove screw (11), washer (12), retainer (13), and twist lock (14) from pump house access door (1).
5.
Remove seal (15) from pump house access door (1).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
6.
Clean seal (15) residue from pump house access door (1) with mineral spirits.
END OF TASK
PUMP HOUSE PANEL DOORS INSTALLATION
NOTE
Both driver side and passenger side access doors are installed the same way. Passenger
side shown.
1.
Install seal (15) on pump access door (1).
2.
Install twist lock (14) on access door (1) with retainer (13), washer (12), and screw (11).
3.
Install hinge (6) on pump house access door (1) with two screws (10), washers (9), lockwashers (8) and
nuts (7).
0551-2
