DRAFT
TM 5-4210-249-13&P-3
0549
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00910
NOTE
Install seatbelt anchor in same position as noted prior to removal.
5.
Install seatbelt anchor (4) on vehicle with washer (3), screw (2), and locknut (1).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
6.
Apply sealant to six locknuts (15), (12), and (5) and six screws (15), (12), and (5) to mark torque point.
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0549-4