DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
REAR SPLASH GUARD REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 141
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Water pump engine OFF (WP 0022)
Locknut (4)
Engine OFF (TM 9-2320-347-10)
Locknut (3)
Wheels chocked (TM 9-2320-347-10)
REMOVAL
TFFT00748
NOTE
Driver side and passenger side rear splash guards are removed the same way. Driver
side rear splash guard shown.
1.
Remove four locknuts (1), eight washers (2), four screws (3), retainer (4), and splash guard (5) from
bracket (6). Discard locknuts.
NOTE
Passenger side bracket is mounted to vehicle with four screws.
2.
Remove three locknuts (7), six washers (8), three screws (9), and bracket (6) from vehicle. Discard locknuts.
END OF TASK
0546-1