DRAFT
TM 5-4210-249-13&P-3
0545
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01191
NOTE
Perform Steps (11) through (14) to place rear hard lift assembly in operating position.
NOTE
Driver side and passenger side end plate tubes are installed the same way. Passenger
side shown.
11. Remove lock pin (1) from rear hard lift assembly (2).
12. Push end plate tube (3) in and rotate until bushing (4) on end plate tube (3) is pointing to rear of vehicle.
13. Align hole (5) in rear hard lift tube (6) with hole (7) in end plate tube (3).
14. Install lock pin (1) in rear hard lift tube (6) and end plate tube (3).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0545-7/(8 blank)