DRAFT
TM 5-4210-249-13&P-3
0535
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04255
CAUTION
Rotor vane housing needs to be flipped 180 degrees in order for the steering pump
to operate correctly with the air compressor and steering pump change of position.
Failure to comply will not allow steering pump to operate correctly.
11. Remove rotor vane housing (18) and preformed packing (22) from body (14). Discard preformed packing.
12. Lightly lubricate preformed packing (22) with clean oil, and install preformed packing (22) on body (14).
13. Flip rotor vane housing (18) 180 degrees and position rotor vane housing (18) on two alignment pins (23),
preformed packing (22), and body (14).
TFFT04254
14. Lightly lubricate preformed packing (20) with clean oil, and position pressure plate (21), preformed
packing (20), and spring (19) on rotor vane housing (18).
0535-4
