DRAFT
TM 5-4210-249-13&P-3
0512
REMOVAL
TFFT00339
NOTE
Both passenger side and driver side SCBA seats are replaced the same way. Driver side
shown.
Seat belt anchor needs to be removed in order to provide clearance for SCBA seat
removal.
1.
Remove locknut (1), washer (2), screw (3), and seat belt anchor (4) from vehicle. Discard locknut.
NOTE
Note position of seat base prior to removal to ensure proper installation.
2.
Remove two nuts (5), lockwashers (6), four washers (7), two screws (8), and seat base (9) from seat
frame (10) and vehicle. Discard lockwashers.
3.
Remove two screws (11), lockwashers (12), washers (13), and SCBA seat (14) from vehicle. Discard
lockwashers.
0512-2