DRAFT
TM 5-4210-249-13&P-3
0510
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02119
10. Remove two locknuts (27), washers (28), screws (29), and pads (30) from door (3). Discard locknuts.
END OF TASK
INSTALLATION
1.
Install two pads (30) on door (3) with two screws (29), washers (28), and locknuts (27).
2.
Install bracket (26) on vehicle with two washers (25) and screws (24).
3.
Install bracket (20) on vehicle with two washers (23), lockwashers (22), and screws (21).
NOTE
Install washers in same location as noted prior to removal.
4.
Install pivot block (15) on bracket (20) with four washers (17) and (18), screw (19), and locknut (16).
5.
Install rubber hook latch (14) on pivot block (15) with two washers (13), lockwashers (12), and screws (11).
6.
Install foam tape (10) on door (3).
7.
Install two rubber hooks (9) on door (3) with two screws (8) and locknuts (7).
0510-4
