DRAFT
TM 5-4210-249-13&P-3
0487
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00891
CAUTION
Routing of wires and connectors may vary. Disconnect additional connectors if
required. Failure to follow instructions may cause damage to equipment.
NOTE
Pipe and valve are replaced as an assembly.
4.
With the aid of an assistant, remove two locknuts (5), U-bolt (6), cradle (7), and pipe (8) from bracket (9) and
vehicle. Discard locknuts.
5.
Remove electric motor and drive assembly (10) from valve (11) (WP 0388).
6.
Remove elbow (12) and nipple (13) from adapter (14).
7.
Remove pipe (8) from adapter (14).
8.
Remove four screws (15) and adapter (14) from valve (11).
9.
Remove four screws (16) and adapter (17) from valve (11).
10. Remove elbow (12) and nipple (18) from tee (19).
11. Remove two nipples (13) and (18) from elbow (12).
12. Remove two fittings (3) and (20) from tee (19).
END OF TASK
0487-2
