DRAFT
TM 5-4210-249-13&P-3
0476
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01214
5.
Remove two screws (16), flange (17), preformed packing (18), and tube (19) from engine (20). Discard
preformed packing.
6.
Remove tube (19) and preformed packing (21) from tank (7). Discard preformed packing.
END OF TASK
INSTALLATION
1.
Install tube (19) and preformed packing (21) on tank (7).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
2.
Apply sealing compound to flange (17), and install tube (19), preformed packing (18), and flange (17) on
engine (20) with two screws (16).
3.
Install tube (14), fitting (13), and two preformed packings (5) on rear of cylinder head (15).
4.
Install three clips (9) on intake manifold (10) with three screws (8).
5.
Install tube (14), fitting (6), and two preformed packings (5) on tank (7) with screw (4).
0476-3