DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
CAB PUMP CONTROL WIRE HARNESS REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 55, 88
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Personnel cab instrument panel assembly
Tags, Identification (WP 0625, Item 51)
removed (WP 0312)
Ties, Cable, Plastic (WP 0625, Item 58)
Siren control removed (WP 0341)
Lockwasher (1)
Lockwasher (5)
Lockwasher (3)
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03175
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Note routing of main wire harness prior to removal to ensure proper installation.
Note position and remove cable ties, split looms, and cushion clips as required.
1.
Remove nut (1), lockwasher (2), wire 1027 (3), wire 1640 (4), and wire 1023 (5) from cab ground terminal
block (6). Discard lockwasher.
0443-1