DRAFT
TM 5-4210-249-13&P-3
0441
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03167
14. Remove four locknuts (38) and cushion clips (39) from cab instrument panel assembly (40). Discard locknuts.
15. Remove four locknuts (41), cab power distribution wire harness block (42), and four screws (43) from cab
instrument panel assembly (40). Discard locknuts.
16. Remove cab power distribution wire harness and block (42) from vehicle.
END OF TASK
INSTALLATION
NOTE
Route cab power distribution wire harness on vehicle as noted prior to removal.
Install cushion clips, split loom, and cable ties as noted.
1.
Install cab power distribution wire harness and block (42) on vehicle.
2.
Install cab power distribution wire harness block (42) on cab instrument panel assembly (40) with four
screws (43) and locknuts (41).
3.
Install four cushion clips (39) on cab instrument panel assembly (40) with four locknuts (38).
0441-6
