DRAFT
TM 5-4210-249-13&P-3
0382
INSTALLATION
1.
Install cord reel rewind circuit breaker (4) on bracket (13) with two screws (12), washers (11), and
locknuts (10).
2.
Install wire 1296580 (6) on cord reel rewind circuit breaker (4) with locknut (5).
3.
Install high amperage cable (3) and cord reel control wire (2) on cord reel rewind circuit breaker (4) with
locknut (1).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
4.
Apply sealing compound to electrical connections at wire 1296580 (6), high amperage cable (3), and cord reel
control wire (2).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect batteries (TM 9-2320-325-14&P)
2.
Stow cord reel (WP 0037)
END OF TASK
END OF WORK PACKAGE
0382-3/(4 blank)