DRAFT
TM 5-4210-249-13&P-3
0360
3.
Remove double circuit breaker (9) from bus bar (10) and bracket (11).
4.
Loosen screw (12) and remove two wires (13) and (14) from double circuit breaker (9).
NOTE
Perform Steps (5) and (6) for removal of all single circuit breakers.
Number of wires may vary. Note position and quantity before removal.
5.
Loosen screw (15) and remove wire (16) from single circuit breaker (17).
6.
Remove single circuit breaker (17) from bus bar (10) and bracket (11).
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) through (3) for installation of all double circuit breakers.
1.
Install two wires (14) and (13) on double circuit breaker (9) and tighten screw (12).
2.
Install double circuit breaker (9) on bracket (11) and bus bar (10).
3.
Install two wires (8) and (7) on double circuit breaker (9) and tighten two screws (5) and (6).
NOTE
Perform Steps (4) and (5) for installation of all single circuit breakers.
4.
Install wire (16) on single circuit breaker (17) and tighten screw (15).
5.
Install single circuit breaker (17) on bracket (11) and bus bar (10).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0360-3
