DRAFT
TM 5-4210-249-13&P-3
0349
INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00777
NOTE
All rear marker/clearance LEDs are installed the same way. Passenger side shown.
1.
Pull connector (6) through back of marker/clearance LED cover (5).
2.
Connect connector (6) to back of marker/clearance LED (4).
3.
Install marker/clearance LED (4) and marker/clearance LED cover (5) on vehicle with two locknuts (3),
washers (2), and screws (1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install light bezel cover (driver side only) (WP 0397)
2.
Remove wheel chocks (TM 9-2320-347-10)
3.
Connect batteries (TM 9-2320-325-14&P)
END OF TASK
END OF WORK PACKAGE
0349-2