DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
REAR MARKER/CLEARANCE LED REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 64
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Batteries disconnected (TM 9-2320-325-14&P)
Locknut (2)
Wheels chocked (TM 9-2320-347-10)
Light bezel cover removed (driver side
only) (WP 0397)
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00777
NOTE
All rear marker/clearance LEDs are removed the same way. Passenger side shown.
1.
Remove two screws (1), washer (2), locknuts (3), marker/clearance LED (4), and marker/clearance LED
cover (5) from vehicle. Discard locknuts.
2.
Disconnect connector (6) from back of marker/clearance LED (4).
3.
Remove marker/clearance LED cover (5) from connector (6).
END OF TASK
0349-1
