DRAFT
TM 5-4210-249-13&P-3
0344
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01573A
NOTE
Lamp must be replaced as indicated on lamp cover with TOP facing up. Rotate lamp
45 degrees in order to remove lamp from mounting base.
Lamp will only function if correctly installed on rubber mounting of pigtail. Plastic tabs on
lamp must align with openings on rubber mounting of pigtail. It is possible to force lamp
on rubber mounting of pigtail in opposite position, which will not allow lamp to operate.
Note position of lamp on rubber mounting of pigtail prior to removal to ensure proper
installation.
2.
Remove lamp (4) from mounting base (3).
3.
Remove lamp (4) from rubber mounting of pigtail (5).
4.
Remove two screws (6), lockwashers (7), washers (8), and bracket (9) from cab roof (10). Discard
0344-2