DRAFT
TM 5-4210-249-13&P-3
0342
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01589
NOTE
Two wires for marker light must be cut behind grommet in plastic loom covering wires.
Remove cable ties as required.
Tag and mark wires prior to removal to ensure proper installation.
3.
Cut two wires (6) and (7) in plastic loom (8) (TM 9-2320-325-14&P).
4.
Remove two screws (9), light bracket (4), and two wires (6) and (7) from grommet (10) and mounting
bracket (11).
5.
Remove grommet (10) from mounting bracket (11).
END OF TASK
INSTALLATION
NOTE
Install cable ties as required.
1.
Install grommet (10) on mounting bracket (11).
2.
Position two wires (7) and (6) through grommet (10) and install light bracket (4) on mounting bracket (11) with
two screws (9).
3.
Repair two wires (7) and (6) and cover with plastic loom (8) (TM 9-2320-325-14&P).
NOTE
Install lamp on rubber mounting of pigtail as noted prior to removal.
4.
Install marker light (3) on rubber mounting of pigtail (5).
0342-3
