DRAFT
TM 5-4210-249-13&P-3
0344
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01574
NOTE
Note position of wire prior to removal to ensure proper installation.
5.
Disconnect connector (11) and remove bracket (9) from vehicle.
6.
Remove two screws (12), mounting base (3), gasket (13), and wire (14) from bracket (9).
7.
Remove grommet (15) from bracket (9).
END OF TASK
INSTALLATION
NOTE
Passenger side and driver side clearance lights are installed the same way. Driver side
shown.
1.
Install grommet (15) on bracket (9).
NOTE
Install wire as noted prior to removal.
2.
Install wire (14), mounting base (3), and gasket (13) on bracket (9) with two screws (12).
3.
Connect connector (11).
0344-3
