DRAFT
TM 5-4210-249-13&P-3
0311
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
.TFFT02757
13. Disconnect FRONT & REAR FLASH connector (38) from cab instrument panel wire harness connector (39).
14. Remove locknut (40), cushion clip (41), locknut (42), washer (43), and screw (44) from FRONT & REAR
FLASH control (45). Discard locknuts.
15. Remove nut (46), locknut (47), washer (48), screw (49), and FRONT & REAR FLASH control (45) from cab
instrument panel A (2). Discard locknut.
16. Remove cab instrument panel A (2) from vehicle.
END OF TASK
PANEL A INSTALLATION
1.
Place cab instrument panel A (2) in vehicle.
2.
Install FRONT & REAR FLASH control (45) on cab instrument panel A (2) with screw (49), washer (48),
locknut (47), and nut (46).
3.
Install screw (44), washer (43), locknut (42), cushion clip (41), and locknut (40) on FRONT & REAR FLASH
control (45).
4.
Connect FRONT & REAR FLASH connector (30) to cab instrument panel wire harness connector (39).
5.
Install SIDE FLASH control (33) on cab instrument panel A (2) with screw (37), washer (36), locknut (35), and
nut (34).
6.
Install screw (32), washer (31), locknut (30), cushion clip (29), and locknut (28) on SIDE FLASH control (33).
7.
Connect SIDE FLASH connector (26) to cab instrument panel wire harness connector (27).
0311-5
