DRAFT
TM 5-4210-249-13&P-2
0227
INSTALLATION
TFFT01183
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Perform Steps (1) and (2) if studs were removed.
1.
Apply anti-seize compound to threads of 12 studs (6).
NOTE
Position all studs as noted prior to removal.
2.
Install 12 studs (6) on engine (7).
3.
Install six gaskets (5) and exhaust manifold (2) on engine (7) with 12 studs (6), washers (4), and nuts (3).
Tighten 12 nuts (3) to 17 to 20 lb-ft (22.5 to 27.5 Nm).
4.
Apply sealant to 12 nuts (3) to mark torque point.
NOTE
Perform Step (4) if studs were removed.
5.
Install four studs (1) on exhaust manifold (2).
END OF TASK
FOLLOW-ON MAINTENANCE
Install water pump engine turbocharger (WP 0250)
END OF TASK
END OF WORK PACKAGE
0227-2
