DRAFT
TM 5-4210-249-13&P-2
0201
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02264
4.
Cut wire (14) (TM 9-2320-325-14&P).
5.
Loosen two screws (15) and remove wires (16) and (17) from air conditioner relay module block (18).
6.
Loosen six screws (19) and remove wires (20), (21), (22), (23), (24), and (25) from air conditioner/heater relay
module block (26).
7.
Cut wire (27) (TM 9-2320-325-14&P).
8.
Loosen six strain relief connectors (28) and remove cables (29) from control box (30).
9.
Remove four screws (31) and control box (30) from vehicle.
END OF TASK
AIR CONDITIONER/HEATER CONTROL BOX INSTALLATION
NOTE
Install cable ties as required.
1.
Install control box (30) on vehicle with four screws (31).
2.
Install six cables (29) on control box (30) and tighten strain relief connectors (28).
3.
Repair wire (27) (TM 9-2320-325-14&P).
4.
Install six wires (20), (21), (22), (23), (24), and (25) on air conditioner/heater relay module block (26) with six
screws (19).
5.
Install two wires (16) and (17) on air conditioner relay module block (18) with two screws (15).
6.
Repair wire (14) (TM 9-2320-325-14&P).
0201-11
