DRAFT
TM 5-4210-249-13&P-2
0201
MOTOR CONTACTOR REMOVAL
TFFT01795
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Remove cable ties as required.
1.
Loosen four screws (1) and remove six wires (2) from motor contactor (3).
2.
Remove two locknuts (4) and motor contactor (3) from control box (5). Discard locknuts.
NOTE
Motor contactor may need to be turned to access screws.
3.
Loosen two screws (6) and remove wires (7) from motor contactor (3).
4.
Remove motor contactor (3) from control box (5).
END OF TASK
MOTOR CONTACTOR INSTALLATION
NOTE
Install cable ties as required.
1.
Position motor contactor (3) in control box (5).
2.
Install two wires (7) on motor contactor (3), and tighten two screws (6).
3.
Install motor contactor (3) in control box (5) with two locknuts (4).
4.
Install six wires (2) on motor contactor (3), and tighten four screws (1).
END OF TASK
0201-7
