DRAFT
TM 5-4210-249-13&P-2
0201
CIRCUIT BREAKER REMOVAL
TFFT01797
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Remove cable ties as required.
1.
Remove four locknuts (1), washers (2), wires (3), and bus bar (4) from two circuit breakers (5) and (6).
Discard locknuts.
2.
Remove locknut (7) and two circuit breakers (5) and (6) from control box (8). Discard locknut.
END OF TASK
CIRCUIT BREAKER INSTALLATION
NOTE
Install cable ties as required.
1.
Install two circuit breakers (5) and (6) in control box (8) with locknut (7).
2.
Install bus bar (4) and four wires (3) on two circuit breakers (5) and (6) with four washers (2) and locknuts (1).
END OF TASK
0201-9