DRAFT
TM 5-4210-249-13&P-2
FIELD LEVEL MAINTENANCE
CREW CAB AIR CONDITIONER COMPRESSOR DRIVE BELT ADJUSTMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Personnel Required
Gauge, Belt Tensioner (WP 0622, Item 16)
MOS 52C, Utilities equipment repairer
Tool Kit, General Mechanic's: Automotive
Equipment Conditions
(WP 0622, Item 27)
Crew cab bench seat and access panel
Materials/Parts
removed (WP 0501)
Tags, Identification (WP 0625, Item 51)
Crew cab air conditioner compressor assembly
removed (WP 0210)
References
WP 0614, Fig. 6
ADJUST DRIVE BELT
TFFT01829
1.
Loosen four screws (1), washers (2), and locknuts (3) on bracket (4) and compressor (5).
CAUTION
Do not over-tighten belt. Failure to comply may result in damage to equipment.
2.
Using a belt tensioner gauge, tighten two drive belts (6) and (7) to a maximum of 120 lb-ft (162.7 Nm).
3.
Tighten four locknuts (3), washers (2), and screws (1) on compressor (5) and bracket (4).
END OF TASK
0189-1