DRAFT
TM 5-4210-249-13&P-2
0156
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04241A
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 33.
Put EMERG MASTER and UPPER REAR WARNING switches to off position
(WP 0004). Turn Service Drive Lights Off (TM 9-2320-347-10). Turn battery
disconnect switch to OFF position (WP 0007). Open upper stowage compartment
hatch T1 (WP 0010). Remove warning light protector (WP 0351). Disconnect
passenger side body wire harness upper rear warning light connector from non-
operating warning light. Disconnect passenger side body wire harness upper rear
warning light connector from operating warning light. Connect passenger side body
wire harness upper rear warning light connector which was removed from operating
warning light to non-operating warning light. Turn battery disconnect switch to ON
position (WP 0007). Turn Service Drive Lights On (TM 9-2320-347-10). Put EMERG
MASTER and UPPER REAR WARNING switches to on position (WP 0004). Check if
upper rear warning light in non-operating position operates.
If warning light connected to operating passenger side body wire harness
connector does not operate, replace non-operating warning light (WP 0351).
0156-25