DRAFT
TM 5-4210-249-13&P-2
0156
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04240
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 32.
Put EMERG MASTER and UPPER REAR WARNING switches to off position
(WP 0004). Turn Service Drive Lights Off (TM 9-2320-347-10). Turn battery
disconnect switch to OFF position (WP 0007). Open upper stowage compartment
hatch T1 (WP 0010). Remove warning light protector (WP 0351). Disconnect
passenger side body wire harness upper rear warning light connector. Turn battery
disconnect switch to ON position (WP 0007). Turn Service Drive Lights On
(TM 9-2320-347-10). Put EMERG MASTER and UPPER REAR WARNING switches to
on position (WP 0004). With a test lead set, check for 22 to 28 VDC between wire 1612
(black) from passenger side body wire harness upper rear warning light connector,
terminal 3 to a known good ground.
a.
If 22 to 28 VDC are present, repair wire 2740 in passenger side body
harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0456).
b.
If 22 to 28 VDC are not present, repair wire 1612 in passenger side
body wire harness if repairable (TM 9-2320-325-14&P), or replace
passenger side body wire harness (WP 0456).
0156-24