DRAFT
TM 5-4210-249-13&P-2
0146
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04383
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 4.
Shut off water pump engine (WP 0022). Turn battery disconnect switch to OFF position
(WP 0007). Open pump operator's panel housing (WP 0325). Disconnect pump
operator's panel wire harness pump operator's panel pressure governor 4-terminal
connector from pump operator's panel pressure governor. Remove pump house
panel S (WP 0540). Disconnect pump operator's panel wire harness pump house
power distribution wire harness connector DP2. With a test lead set, check for
continuity across pump operator's panel wire harness wire 1118, from pump operator's
panel pressure governor control panel 4-terminal connector, terminal 1 to pump
operator's panel wire harness pump house power distribution wire harness connector
DP 2, terminal A.
If continuity is not present, repair wire 1118 in pump operator's panel wire
harness if repairable (TM 9-2320-325-14&P), or replace pump operator's
panel wire harness (WP 0459).
0146-3