DRAFT
TM 5-4210-249-13&P-2
0142
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3.
Connect wire 2855 (red) to TANK TO PUMP indicator terminal. Disconnect wire 1023
(black) from TANK TO PUMP indicator terminal. Check for continuity across cab pump
control wire harness wire 1023 (black) from TANK TO PUMP indicator connector to a
known good ground.
If there is no continuity, repair wire 1023 in cab pump control wire harness if
repairable (TM 9-2320-325-14&P), or replace cab pump control wire
harness (WP 0443).
TFFT03543
Step 4.
Connect wire 1023 (black) to TANK TO PUMP indicator connector. Disconnect
jumperwire 2768 (white) from TANK TO PUMP indicator terminals. Check for continuity
across jumperwire 2768 (white) from terminal to terminal.
a.
If there is continuity, replace TANK TO PUMP indicator (WP 0313).
b.
If there is no continuity, repair or replace jumperwire 2768
(TM 9-2320-325-14&P).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0142-3/(4 blank)
