DRAFT
TM 5-4210-249-13&P-2
0130
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3.
Close all stowage compartment doors and hatches (WP 0010). Turn ENGINE switch to
OFF position (TM 9-2320-347-10). Check if DO NOT MOVE APPARATUS WHEN
LIGHT IS ON indicator flashes (WP 0004).
If DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator flashes, go
to Step 31.
Step 4.
While an assistant opens and closes each of following stowage compartment doors one
at a time (WP 0010), check if DO NOT MOVE APPARATUS WHEN LIGHT IS ON
indicator flashes when door is open (WP 0004). Open passenger side rear stowage
compartment P1 door (WP 0010). Open passenger side center stowage compartment
P2 door (WP 0010), then close. Open passenger side center stowage compartment P3
door (WP 0010), then close. Open passenger side top hatch T1 (WP 0010), then close.
If DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator does not
flash when stowage compartment door is open, go to Step 27.
Step 5.
While an assistant opens and closes each following compartment doors, one at a
time (WP 0010), check if DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator
flashes when door is open (WP 0004). Open driver side rear stowage compartment D1
door (WP 0010), then close. Open driver side center stowage compartment D2 door
(WP 0010), then close. Open driver side front stowage compartment D3
door (WP 0010), then close.
If DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator does not
flash when stowage compartment door is open or ladder rack is unstowed,
go to Step 23.
Step 6.
While an assistant opens and closes each of the following crew cab roof hatch and crew
cab doors one at a time (WP 0010), check if DO NOT MOVE APPARATUS WHEN
LIGHT IS ON indicator flashes when door is open (WP 0004). Open passenger side
crew cab door (WP 0010), then close. Open driver side crew cab door (WP 0010), then
close. Open crew cab roof hatch (WP 0018), then close.
If DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator does not
flash when crew cab doors are opened, go to Step 20.
Step 7.
While an assistant unstows equipment (ladder) rack, then stows equipment (ladder)
rack (WP 0011), check if DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator
flashes when equipment (ladder) rack is unstowed.
If DO NOT MOVE APPARATUS WHEN LIGHT IS ON indicator does not
flash when equipment (ladder) rack is unstowed, go to Step 16.
0130-2
