DRAFT
TM 5-4210-249-13&P-1
0121
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04323
Step 6.
Install fuse FS 21 (WP 0401). Remove cab instrument panel C (WP 0311). Disconnect
cab instrument panel wire harness GENERATOR PTO switch connector. Turn battery
disconnect switch to ON position (WP 0007). Check for 22 to 28 VDC between cab
instrument panel wire harness wire 2700 (red) at GENERATOR PTO switch connector,
terminal 6 and a known good ground.
If 22 to 28 VDC are not present, go to Step 11.
0121-6
