DRAFT
TM 5-4210-249-13&P-1
0115
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04119
Step 64.
While an assistant pushes pump operator's panel PUMP PRIMER switch to on position
(WP 0004), with a test lead set, check for 22 to 28 VDC between pump operator's panel
wire harness wire 1590 (red) at pump primer motor diode pack connector, terminal B
and a known good ground.
If 22 to 28 VDC are not present, go to Step 71.
Step 65.
While an assistant puts personnel cab PUMP PRIME switch to on position (WP 0004),
with a test lead set, check for 22 to 28 VDC between pump operator's panel wire
harness wire 1590 (red) at pump primer motor diode pack connector, terminal B and a
known good ground.
If 22 to 28 VDC are not present, go to Step 68.
0115-37