DRAFT
TM 5-4210-249-13&P-1
0109
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02694
Step 12.
Connect valve control wire harness connector to No. 1 driver side discharge valve
motor. Disconnect valve control wire harness connector from NO. 2 DRIVER SIDE
DISCHARGE VALVE CONTROL. Connect No. 1 driver side discharge valve control
wire harness connector to NO. 2 DRIVER SIDE DISCHARGE VALVE CONTROL. Turn
the battery disconnect switch to ON position (WP 0007). While an assistant pushes
pump operator's panel No. 2 Driver Side Discharge valve control OPEN and CLOSE
buttons (WP 0004), check if No. 1 driver side discharge valve operates.
a.
If No. 1 driver side discharge valve operates, reconnect valve control
wire harness connectors to original positions and replace NO. 1
DRIVER SIDE DISCHARGE valve control (WP 0417).
b.
If No. 1 driver side discharge valve does not operate, reconnect valve
control wire harness connectors to original positions and replace No. 1
driver side discharge valve motor (WP 0388).
0109-8
