DRAFT
TM 5-4210-249-13&P-1
0108
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03812
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 16.
Disconnect driver side pre-connect B valve flow sensor wire harness from driver side
pre-connect B flow sensor. Disconnect driver side pre-connect B valve flow sensor wire
harness from DRIVER SIDE PRE-CONNECT B valve control. Connect driver side
pre-connect B flow sensor to DRIVER SIDE PRE-CONNECT B valve control (removing
wire harness from circuit). While an assistant spins flow sensor paddle wheel, check if
a flow reading is displayed when flow sensor paddle is spinning.
a.
If a flow reading is displayed when flow sensor paddle is spinning,
repair flow sensor wire harness if repairable (TM 9-2320-325-14&P), or
replace driver side pre-connect B valve flow sensor wire
harness (WP 0451).
b.
If a flow reading is not displayed when flow sensor paddle is spinning,
replace driver side pre-connect B valve flow sensor (WP 0390).
0108-14