DRAFT
TM 5-4210-249-13&P-1
0099
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03396
Step 17.
Put GROUND SWEEPS switch to OFF position (WP 0004). Turn battery disconnect
switch to OFF position (WP 0004). With a test lead set, check for continuity across wire
2200 (black) from valve control wire harness GROUND SWEEPS FOAM A foam
system flow control manifold connector, terminal 2 to a known good ground.
a.
If there is continuity, replace GROUND SWEEPS FOAM A metering
control valve (WP 0288).
b.
If there is no continuity, repair wire 2200 in valve control wire harness if
repairable (TM 9-2320-325-14&P), or replace valve control wire
harness (WP 0463).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0099-15/(16 blank)
