DRAFT
TM 5-4210-249-13&P-1
0020
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02199
2.
Remove cap (3) from driver main inlet (4).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 72
Do not use hard suction hose for Step (3). Hard suction hose will not hold pressure.
Hose may fail and separate causing injury to personnel and/or damage to
equipment.
3.
Connect 5 in. (13 cm) or 3 in. (7.6 cm) soft suction hose to driver main inlet (4) and positive water source.
4.
Open supply valve on positive water source.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02193
5.
Crack open DRIVER MAIN INLET BLEEDER valve (5).
0020-2