TM 5-4210-233-14&P-2
6-62. CONTROL VALVE BODY - Continued
NOTE
Record and identify check balls by size and
location.
(5)
Remove check balls (6, 7, 8, 9, and
10).
(6)
Remove retaining pin (1i1) from check
valve pin (12) while other person
presses down on cup washer (13).
(7)
Remove cup washer (13), spring (14),
lubrication check valve (15), and check
valve pin (12) from oil transfer plate
(3).
WARNING
All valves are under spring tension. Release
springs slowly to avoid personal injury.
CAUTION
Do not use magnets to remove valve bodies.
Magnetized valve bodies may not work properly.
NOTE
Tag (Item 32, Appendix E) and mark all parts before
removing.
Record each notch on adjusting ring that touches retaining
pin.
(8)
Press adjusting ring (16) inward and remove retaining pin (17) from modulator valve body (2).
(9)
Remove adjusting ring (16), washer (18), spring (19), valve stop (20), and valve (21) from
modulator valve body (2).
6-364
