TM 5-4210-233-14&P-2
6-58. REAR COVER AND FIRST CLUTCH ASSEMBLY - Continued
(5)
Lightly coat one side of new gasket (5) with grease
(Item 48, Appendix E).
(6)
Set gasket (5) on transmission (3) with greased
side of gasket down.
(7)
Align holes in gasket (5) with holes in transmission (3).
(8)
Install sling lifting device on rear cover (6).
NOTE
There are two different size dowel pins on screw flange face of rear
cover to help align cover with transmission.
(9)
Align screw holes and install rear cover (6) on
transmission (3) while other person operates lifting device. Remove lifting device.
(10)
Install 21 screws (7) with lockwashers (8).
(11)
Install three screws (9) with lockwashers (10).
(12)
Torque screws (7 and 9) alternately to 70 to 80 lb-ft (95
to 108 N m).
(13)
Remove nut (11) and yoke (12).
f. Follow-on Maintenance.
(1) Install governor (see para 5-29.).
(2) Install output yoke, dust shield, and oil seal (see para 6-
56.).
6-340