TM 5-4210-233-14&P-2
6-48. FLYWHEEL ASSEMBLY - Continued
(3)
Align and install lifting bracket (Appendix B, Section III, Item 59) with two screws (4) and washers
(5).
(4)
Remove two screws (6) from access cover (7).
(5)
Remove access cover (7) and gasket (8).
NOTE
Use flywheel lifting bracket to turn flywheel for access to screws
inside converter housing.
(6)
Remove 29 of 30 screws (9) and washers (10). Leave one screw in place behind lifting bracket.
(7)
Install lifting device to lifting bracket.
(8)
Raise lifting device until it supports weight of flywheel (3).
6-258