|
| |
TM 5-4210-233-14&P-1
5-22.
BLOWER REPAIR - Continued
(69)
Install three screws (38) and two spring plates (39)
onto coupling (40).
(70)
Tighten three screws (38) to 30 Ib-ft (40 N•m).
NOTE
Install clean shop cloth between gears.
(71)
Install coupling assembly (40) with three screws (41).
(72)
Tighten three screws (38) to 30 Ib-ft (40 N•m)
(73)
Install rear end plate cover (42) with new gasket (43).
(74)
Install 10 screws (44) and lockwashers (45).
(75)
Tighten screws (44) evenly to 15 lb-ft (20 N•m).
d.
Follow-on Maintenance.
(1) Install blower (see para 5-21).
5-143
|
